ECUHELP KT200II has been thoroughly tested and verified for its capability with the SIEMENS SID201 Peugeot ECU in JTAG Mode. This article provides a comprehensive guide on how to read and write operations using the KT200II, highlighting its efficiency with impressive reading times of 1 minute 23 seconds and writing times of 1 minute 12 seconds.
Step-by-Step Process:
1. Preparing the SIEMENS SID201 ECU:
Begin by opening the SIEMENS SID201 ECU. Carefully solder the dip/sip connectors onto the PCB as demonstrated in the provided image.
2. Connect the ECU to the KT200II.
Detailed images of the connection process are provided for reference.
3. Reading and Writing Operations:
Observe the reading process and the writing process in action.
KT200II Wiring Diagram and Required Kit for SIEMENS SID201 Peugeot:
Kit to use:
– Multifunction cable
– Siemens/Marelli adapter
– Grey flat cable
– Connectors dip/sip
Connect the multifunction cable as follows:
The BDM port is this:
Solder the dip/sip connectors on the PCB:
Insert Siemens/Marelli adapter as in the photo:
KT200II to read and write use the following driver:
→ BDM/ JTAG MODE
→ BDM MPC
→ MPC55x/56x
By following these instructions, users can efficiently manage the SIEMENS SID201 Peugeot ECU using the KT200II in JTAG Mode, ensuring precise and rapid read/write operations.