KT200 Full System Read Write Audi A4 EDC15P+ 1.9 tdi 130ch
ecuhelpshopAudi A4 EDC15P+ 1.9 tdi 130ch Full System R/W OK. CHECKSUM PAR LSUITE. Immo OFF eeprom+flash Using ecuhelp KT200II ecu programmer Reading Audi A4 EDC15P+ 1.9 tdi 130ch Writing Audi…
ECUHELP KT200II Read Write Ford Transit 2.4 via OBD
ECUHELP KT200II is confirmed to read and write Ford Transit 2.4 via OBD. Reading Ford Transit 2.4 via OBD. Writing Ford Transit 2.4 via OBD. Conclusion: ECUHELP KT200II is an…
KT200II read write Seat leon fr 2016 Simos 18.1 Boot mode
ECUHELP KT200II is tested to read/write Seat leon fr 2016 Simos 18.1 Boot mode. Step 1. Password search Kit to use: - Multifunction cable - Bench box - 2 resistances…
KT200II Read Write Renault Master EDC16C36 on Bench
ECUHELP KT200II ECU Programmer is confirmed to read/write Renault Master EDC16C36 on Bench. Connect the multifunction cable as follows, use the Bench Box: To read and write use the…
KT200II Read/Write simos 18.1 (tc1791) seat leon fr 2016 Boot Mode
ECUHELP KT200II ECU Programmer can work with simos 18.1 (tc1791) seat leon fr 2016, Reading, writing and correcting checksum without problems. Step 1: PASSWORD SEARCH Kit to use: - Multifunction…
Read Write Hyundai ME17.9.11 with KT200II ECU Programmer
ECUHELP KT200II ECU Programmer is confirmed to read/write Hyundai ME17. 9.11 on bench. Connect the KT200II multifunction cable to the ECU BOSCH ME17.9.11 as follows: KT200II read and write use…
KT200II read/write SAGEM S3000 MÉGANE RS 2.0 225CV Boot mode
ECUHELP KT200II ECU Programmer is confirmed to read/write SAGEM S3000 MÉGANE RS 2.0 225CV Boot mode. The image of ECU S3000: Connect the KT200II multifunction cable as follows: To READ…
KT200II Read Write EDC17c60 Peugeot 3008 on Bench
ECUHELP KT200II ECU Programmer is tested able to read/write EDC17c60 Peugeot 3008 on Bench. Connect the multifunction cable as follows: Intuitive image of using KT200II to connect the ECU EDC17c60:…
How to fix Kt200II doesn’t open?
ECUHELP KT200II doesn't open, no matter how much I uninstall, the same result, Defender closed. Possible reasons and solution: 1.Delete dfb2xx.dll, and try to start software again. 2.The driver might…
ECUHELP KT200II Read write dcm3.7 vag 1.2 tdi via obd
ECUHELP KT200II ECU Programmer is confirmed to read/write dcm3.7 vag 1.2 tdi via obd. Seeing is believing, please have a look at the following 2 images of using KT200II to…