KT200 II Read Write Scania R450 CONTINENTAL EMS S8

Vehicle and ECU Details Vehicle Model: Scania R450 ECU Type: Continental EMS S8 ECU Programmer Tool Used: KT200II Capabilities: Confirmed to effectively read and write via OBD, including verification and…

Read More

KT200II Read Write BMW MG1CS003 on Bench

Car Model: BMW ECU Type: SPC5777 MG1CS003 ECU Programmer Used: KT200II Test Report: Successfully read and wrote to the ECU without issues. Visual Documentation: ECU Image: BMW SPC5777 MG1CS003 Reading…

Read More

KT20II Read Write EDC17C84 Renault Nissan on Bench

ECU Model: BOSCH EDC17 C84 for Renault, Nissan Tool Used: ECUHELP KT200II on bench Operation Summary: Read: OK Write: OK Checksum: OK Overall Status: Everything OK KT200II wiring diagram of…

Read More

KT200II Peugeot Expert DCM 7.1A VR Read Write

Peugeot Expert DCM 7.1A VR reading OK writing OK everything works very well OBD KT200II ECU Programmer. Image of the ECU DCM 7.1A: Image of writing ECU DCM 7.1A with…

Read More

KT200II read write checksum PSA DCM6.2a on bench

KT200II ECU Programmer is confirmed to work with PSA DCM6.2a, on bench full read 29min. full write 32min.. Checksum all ok. Look at the following image which shows the KT200II…

Read More

KT200II Cla 180 1.6 Turbo Med17.7.2 Read write on Bench

Cla 180 1.6 Turbo (2019) Med17.7.2 Stage 1: OK Pop i bangs: OK Read/write: OK Mode: on Bench Checksum manual ECU Programmer to use: KT200II Look at the following image,…

Read More

KT200II VW TIGUAN DSG DQ380 READ and WRITE Pinout Mode

Vehicle and ECU Details: Model: VW Tiguan 2018 Transmission: DSG DQ380 Operations: Read and write operations successful Mode: Pinout Mode Using: ECUHELP KT200II ECU Programmer Connection and Operation: The KT200II…

Read More

KT200 II Read Write NEW HOLLAND TD5.100 MD1CS069 via OBD

NEW HOLLAND TD5.100 MD1CS069 READ TIME 10 MINUTES WRITE TIME 6 MINUTES Using KT200 II ECU Programmer Mode: via OBD Image of EW HOLLAND TD5.100: KT200 II read MD1CS069 100%…

Read More

KT200II DQ500 VW Cloning Full Backup / Read / Write Ok

Overview: The ECUHELP KT200II programmer has been tested on a VW Passat B8 with a DSG DQ500-MQB Bosch* Can ECU, demonstrating successful cloning, full backup, reading, and writing capabilities. Process:…

Read More

KT200II Read Write Checksum Mercedes Crd3.E1 on Bench

ECUHELP KT200II is confirmed to work with Mercedes Crd3 e1 ECU, it is capable of reading, writing and doing checksum. Look at this image of KT200II writing Mercedes Crd3 e1…

Read More