KT200II Read / Write Peugeot 2.0 HDI 136 DCM3.4 by OBD
ECUHELP KT200II ECU Programmer has been successfully tested on the Peugeot 2.0 HDI 136 with DCM3.4 ECU, it can read and write DCM3.4 via OBD. The process was smooth and…
ECUHELP KT200II ECU Programmer has been successfully tested on the Peugeot 2.0 HDI 136 with DCM3.4 ECU, it can read and write DCM3.4 via OBD. The process was smooth and…
ECUHELP KT200II ECU Programmer has been successfully tested to read and write the VW Passat DSG DQ250 TCU using Pinout Mode. Details: TCU Model: VW Passat DQ250 Function: Read /…
ECUHELP KT200II ECU Programmer has been successfully tested on an Isuzu truck L35 3.0 DTI, equipped with a Transtron ECU. In detail: Vehicle: Truck Isuzu L35 3.0 DTI ECU Type:…
ECUHELP KT200II ECU Programmer has successfully completed bench reading and writing on a 2016 Porsche Macan 3.0L equipped with the Bosch EDC17CP44 ECU. In detail: Vehicle: Porsche Macan 3.0L 2016…
ECUHELP KT200II ECU Programmer has been successfully tested on the MAN TGX E5 truck, equipped with the Bosch EDC7C32+ ECU. Read and write via OBD 100% successfully. Below are images…
ECUHELP KT200II ECU Programmer is confirmed to read/write the flash and eeprom data for Fiat ME7.6.3 Full system mode. To connect to the control unit using: - Multifunction cable
ECUHELP KT200II is confirmed to read/write Audi SIMOS PCR2.1 on Bench, Flash Write Unlock no problem, EGR Off & Checksum ok. Connect the bench box v.2 to the tool and…
ECUHELP KT200II is confirmed to Read / Write Transporter 5.1 2.0 BITDI EDC17CP20 via OBD, write 15 minutes. Image 1 demo: KT200II is reading EDC17CP20 via OBD. Image 2 demo:…
ECUHELP KT200II is confirmed to read/write VW Tiguan 2019 EDC17C74 on bench, checksum by KT200II no problem. Connect the KT200II multifunction cable as follows: To read and write use the…
ECUHELP KT200II User Feedback: BMW F30 28i N20 2.0T MEVD17.2.4 (I think its same as 17.2.9.) R/W in Bench Mode: OK (read 4m30s,write 30s) Write in OBD Mode: ok (but…