ECUHELP KT200II has been successfully tested with the Opel Insignia 2.0 EDC17C19. It can read and write the ECU with no issues, and the checksum is also verified to be correct when performed on the bench.

Read Write Opel edc17c19 on Bench with KT200II-01

Wiring Diagram for Bench Mode:
To connect the KT200II to the Opel EDC17C19 ECU, follow the wiring diagram for the Bosch EDC17 C19 [1796] – Opel [Diesel] in Bench mode. Use the multifunction cable as depicted in the diagram.
Read Write Opel edc17c19 on Bench with KT200II-02

KT200II read and write use the following driver:
To ensure proper communication with the ECU, set up the KT200II with the following driver configuration:
→TC1796 – OPEL
→EDC17 C19

By adhering to these guidelines, you can effectively utilize the KT200II for operations on the Opel Insignia 2.0 EDC17C19, including reading, writing, and verifying the checksum without any complications.