Solution to ECUHELP KT200 OBD Write SID310 Error Stop1
ecuhelpshopECUHELP KT200 OBD Write ECU SID310 “Error Stop1” (shown below). Solution:Please write ECU SID310 in boot mode with ECUHELP KT200. Kit to use: Multifunction cable OBD Cable (to search password…
Tricore Clone MEDC17 using ECUHELP KT200 ECU Tool
Confirmed: ECUHELP KT200 ECU Tool is capable of Tricore Clone ECU MEDC17. Here is a brief procedure to follow: Read out all parts, including flash and EPROMs, from the old…
Fixed! ECUHELP KT200 “ERRO SET0”
When using ECUHELP KT200 to read/write MD1CP001 - MRD1 in Mercedes Benz, you may get the error “ERROR SET0” (shown below). Please open the device first. Locate the Soldering Point.…
KT200 Read and Write PSA SID807 evo tc 797 in boot Mode
It has been verified that the ECUHELP KT200 possesses the capability to accurately read and write PSA SID807 evo tc1797 boot mode. For those who are navigating the KT200 for…
htprog software “Open KT200 Device Error” solution
When I open the htprog software, it pops up “Open KT200 Device Error”, how to solve it? I have KT200 full version + HTprog. It works with kt200 connected, kt200…
Cloning EDC17C50 by ECUHELP KT200 + HTprog
I have finally received the ECUHELP HTprog, and it is working perfectly. Although I encountered some initial frustration, I managed to resolve it. However, I have a question regarding the…
ECUHELP HTprog Software Download, Setup and Activation
Embarking on the ECU cloning journey with ECUHELP HTprog is made simple through a straightforward software installation process. With user-friendly interfaces and clear instructions, you'll have the software up and…
KT200 Read and Write PCR2.1 Bench / OBD mode
KT200 Read and Write PCR2.1 both Bench and OBD mode no problem. 1. Bench mode: OK Question: How ECUHELP KT200 ecu programmer Read and write pcr2.1 on Bench? Do I…
How to read write EDC17C50 BMW via ECUHELP HTprog?
I have the same problem with EDC17C50 BMW when using ECUHELP HTprog.When trying to read, no power is supplied to the unit,Does he work for anyone? Yes, EDC17C50 BMW is…
ECUHELP KT200 “Selection driver not active” Solution
I am encountering an issue with the KT200 programmer where the selection driver is not active. Could you please provide information regarding this problem? Possible causes and solutions:The KT200 tool…