ecuhelpshopUnderstanding ECUHELP KT200 Jumper
Have you taken a closer look at ECUHELP KT200's PCB? If you examine the image below, you'll spot a distinct jumper. At times, there's a need to connect two points…
Fixed! KT200 R/W MEVD17.2.G “Sensor Level Error”
We've verified that the ECUHELP KT200 can successfully read/write mevd17.2.G on Bench. Nevertheless, a user encountered the “Error Sensor Level” issue, accompanied by a low 12V battery indication. For clarity,…
ECUHELPshop.com Anniversary Sale (KT200 Lowest Price of Year)
ECUHELPshop.com Anniversary on Sale. Valid: 8th August - 22th August Worldwide Free Shipping KT200 car/truck version (in a suitcase):519euro KT200 Full Version (in a suitcase):625euro KT200 Full version + offline…
Fix KT200 EDC16C1 “turn off dashboard off and back on. then wait for 10 seconds …”?
KT200 ECU Programmer is having trouble connecting to the EDC16C1 ECU. Even with the pinout adhering to software instructions, the error message appears: "Turn off dashboard and turn it back…
Tested! ECUHELP KT200 Read/Write EDC15 no problem
Question: Can KT200 Read/Write EDC15? Absolutely! (Tested) more than 100 edc15 programmed by KT200 ECU Programmer and not a single failure, you only have to do a manual checksum (using…
KT200 edc17cp42 Bench ecu clone “Non-erasable sector” Solution
When using ECUHELP KT200 to write edc17cp42 Citroen ecu clone on bench, I got info “End Writing.ADDRESS 018000:Non-erasable sector in Bench mode” (shown as below”). Possible Reason: You have another…
ECUHELP KT200 how to correct checksum ME17.3.0?
Have ECUHELP KT200 to read/write ME17.3.0 without any problem, but checksum failed, how to correct the checksum ME17.3.0? Look at this info KT200 gave me: checksum not supported for full…
ABRITES or KT200 + HTprog ECU Programmer / Clone Tool
This article is written for those who are interested in both ABRITES ECU PROGRAMMIN TOOL FULL ECU PACKAGE and ECUHELP KT200+ HTPROG, but need our advice on which is preferred…
ECUHELP KT200 or TagFlash ECU Programmer?
Tagflash is a new clone ecu programmer, it is supposedly covering the same protocols until April, 2023 as genuine fgtech. Both KT200 and TagFlash work well. when the user knows…
ECUHELP KT200 VS KTAG V8 ECU Programmer
When it comes to ECU programming tool, choosing the right tool is essential for efficient reprogramming tasks. Among the options available, KT200 and KTAG V8 stand out as popular choices.…