ecuhelpshopKT200 Plus read and write DCM6.2V on bench, DTC off, IMMO Off
ECUHELP KT200 Plus upgrade: can read and write DCM6.2V on bench, also perform DTC Off and IMMO off. Image 1. The outlook of the ECU DCM6.2V. Image 2. The ECU…
KT200II Read Write Ford fiesta st 1.5 200 cv Bosch MG1CS016 on Bench
ECUHELP KT200II ecu programmer is confirmed to read and write Ford fiesta st 1.5 200 cv Bosch MG1CS016 on Bench. The wiring diagram of KT200 II BOSCH MG1CS016 –…
KT200 II Read/Write Denso RF7x Mazda 6 2.0 MZR-CD 2007 via OBD
ECUHELP KT200 II ECU tool has been successfully tested for reading and writing the Denso RF7x ECU on a Mazda 6 2.0 MZR-CD from 2007 using OBD mode. The checksum…
KT200 2 Read/Write BMW 330D 3.0L 6cyl in Pinout Mode
ECUHELP KT200 2 ECU tool can successfully read and write data from a BMW 330D 3.0L 6-cylinder engine in pinout mode. This procedure involves cloning the vehicle's ECU, reading the…
KT200 II Read Write Porsche Bosch ME7.8 boot mode
KT200 II ECU Programmer is confirmed to read and write Porsche Bosch ME7.8 boot mode. This is the outlook of the Porsche Bosch ME7.8: Please follow KT200 II wiring diagram…
KT200 II Read Write Mitsubishi L200 Denso SH7059 Full System Mode
ECUHELP KT200 II has been successfully tested to read and write the Mitsubishi L200 Denso SH7059 ECU in full system mode. Step 1: Connection KT200 II is connected to the…
KT200 II Read and Write MED17.5.5 Polo GTI 1.4 TSI 180 on Bench
ECUHELP KT200 II ECU Programmer has been successfully tested for bench mode reading and writing the MED17.5.5 ECU on the Polo GTI 1.4 TSI 180, including pop and bang tuning…
KT200 II Read and Write VW EDC17C46 on Bench
ECUHELP KT200 II ECU Programmer has been confirmed to successfully read and write the VW EDC17C46 ECU on the bench. Below are images demonstrating the process of reading and writing…
KT200 II read and write MJD 6JF Jtag Mode
KT200 II read and write MJD 6JF Jtag Mode，unlock the speed limit, DTC fault code off.ECU data repair. Look at the following images of using KT200 II to connect the…
KT200 II Read/Write 2L HDi 136cv SID803A on Bench: FAP OFF & EGR OFF
ECUHELP KT200 II ECU Programmer has been successfully tested for read and write operations on a 2L HDi 136cv SID803A ECU. This procedure also includes the ability to disable the…