How to Read / Write VW Bosch MED17.5.21 by ECUHELP KT200?
It is confirmed that ECUHELP KT200 is capable of reading/writing VW Bosch MED17.5.21 with no issue on Bench or in Boot mode or Virtual read / write.
How to use KT200 Bench read/write BOSCH MED17.5.21 [ 1782 ] – VW, Audi, Seat, Skoda [Gasoline]?
Connect the multifunction cable as follows:
To read and write use the following driver:
→ BENCH TRICORE
→ VOLKSWAGEN / AUDI / SEAT / SKODA
→ TC1782 – VAG
→ MED17.5.21
How to use KT200 Boot read/write BOSCH MED17.5.21 [ TC1782 INT.F.] – VW, Audi, Seat, Skoda?
Kit to use:
Multifunction cable
1 resistenza da 100 Ω
PASSWORD SEARCH:
Connect the pinout below with a multifunction cable.
Use the driver:
→ TOOLS BOOT MODE
→ INFINEON TRICORE Tool Password
→ PASSWORD BFT
→ Click on “Find Password” and follow the
software messages.
Now that the password has been found it’s possible to read and write the control unit. See next step.
READ AND WRITE ECU:
Connect with the multifunction cable the following
pinout and the boot shown below.
Use the driver:
→ TOOLS BOOT MODE
→ INFINEON TRICORE Boot
→ SAK TC1782
Alright, the above steps are about how to use ECUHELP KT200 to read /write VW Bosch MED17.5.21. Please follow the step-by-step procedure to operate. Any questions, please visit www.ecuhelpshop.com for online live chat.