KT200 Offline Read and Write Volvo V70 T5 ME7.0 Pinout Mode

Overview of the Process: Reading time for Volvo V70 T5 ME7.0: 4 minutes Writing Stage 1 time: 2 minutes 50 seconds Checksum verification using Winols: All good ECU Programmer to…

Read More

KT200 II Read Write NEW HOLLAND TD5.100 MD1CS069 via OBD

NEW HOLLAND TD5.100 MD1CS069 READ TIME 10 MINUTES WRITE TIME 6 MINUTES Using KT200 II ECU Programmer Mode: via OBD Image of EW HOLLAND TD5.100: KT200 II read MD1CS069 100%…

Read More

KT200II DQ500 VW Cloning Full Backup / Read / Write Ok

Overview: The ECUHELP KT200II programmer has been tested on a VW Passat B8 with a DSG DQ500-MQB Bosch* Can ECU, demonstrating successful cloning, full backup, reading, and writing capabilities. Process:…

Read More

KT200II Read Write Checksum Mercedes Crd3.E1 on Bench

ECUHELP KT200II is confirmed to work with Mercedes Crd3 e1 ECU, it is capable of reading, writing and doing checksum. Look at this image of KT200II writing Mercedes Crd3 e1…

Read More

ECUHELP KT200II Read and Write DCM 7.1B via OBD

Vehicle and ECU Details: Car Model: Peugeot Boxer ECU Type: Delphi DCM7.1B *CAN ECU Programmer: KT200II from ECUHELP Test Results: The KT200II successfully reads and writes the Delphi DCM7.1B ECU…

Read More

KT200 II Citroen DCM6.2 Dpf Egr off read write via OBD

Vehicle and ECU Details: Car Model: Citroen C5 2016 ECU Type: DCM6.2 ECU Programmer to use: ECUHELP KT200II Mode: OBD Procedure: ECUHELP KT200II is used in OBD mode to read…

Read More

KT200II Ford Transit SID211 OBD Mode Read and Write

Vehicle and ECU Details: Car Model: Ford Transit ECU Type: SID211 ECU Programmer: ECUHELP KT200II Mode: OBD Procedure: ECUHELP KT200II is used in OBD mode to read and write the…

Read More

KT200II Read Write Peugeot Bosch ME7.4.4 in Full System

ECUHELP KT200 II ECU Programmer is capable of reading and writing the Peugeot 206 1.6 Bosch ME7.4.4 in full system mode. Procedure: Connection: The KT200II is connected to the Bosch…

Read More

KT200II Read Write Full System E98 Chevrolet S10 Duramax

KT200II ECU Programmer is confirmed to be capable of reading and writing the ECU e98 Chevrolet S10 Duramax in full system mode. Connection and Operation: Establishing the Connection: The connection…

Read More

KT200II Read Continental CM2150E Jtag Mode

ECUHELP KT200II ECU Programmer is confirmed to read Continental CM2150E Jtag Mode. Look at the images of ECU Continental CM2150E: Open the ECU. Use KT200II to read Continental CM2150E Jtag…

Read More