KT200 Plus Read and Write EDC17C53 TC1767, DTC OFF, IMMO OFF
ECUHELP KT200 Plus has been successfully tested for reading and writing EDC17C53 TC1767 ECUs, including performing IMMO off and DTC off operations.
Step-by-Step Procedure:
Step 1: Connect KT200 Plus to the ECU EDC17C53 TC1767
Establish a secure connection between the KT200 Plus and the EDC17C53 TC1767 ECU.
Step 2: Start Reading the Flash Data
Initiate the process to read the flash data from the ECU.
Step 3: Read EEPROM Successfully
Read the EEPROM data and ensure that the process completes without errors.
Step 4: Load the Flash File
Load the flash file by selecting the one with the latest date, ensuring it is the most recent and relevant version.
Step 5: Perform DTC OFF
Click on “DTC Management”.
Select the desired DTC codes to deactivate.
Click on “Save” to complete the process.
Step 6: Perform IMMO OFF
Click on “IMMO OFF” to deactivate the immobilizer system.
Verify that the modification is completed successfully.
Step 7: Write EEPROM Data
Choose the latest EEPROM file.
Write the data to the ECU and confirm that the process is successful.
Step 8: Write Flash Data
Write the flash data back to the ECU to complete the process.
Conclusion
ECUHELP KT200 Plus provides a reliable solution for reading and writing to EDC17C53 TC1767 ECUs, as well as executing essential operations like IMMO off and DTC off. This comprehensive tool ensures efficient ECU management and modification.