KT200II R/W SID805 on Peugeot 107 & Citroën C1 (Full System Mode)
ecuhelpshopECUHELP KT200II ECU Programmer has been successfully tested for reading and writing the SID805 ECU on PSA Peugeot 107 and Citroën C1 1.4 HDI Full System Mode. Hardware Connection: To…
How to Fix KT200-II Not Starting After Windows 10 Update?
User Feedback: "After updating to the latest Windows 10 version, my KT200 II suddenly won’t start. I’m wondering if anyone else has experienced this issue? " Possible Reason and Solution:…
Do Need KT200 Plus If You Have ECUHELP KT200II?
One common question is: "Do I need the KT200 Plus if I already own the ECUHELP KT200II ECU Programmer?" The short answer is yes, and in this article, we'll explain…
Fix KT200II Peugeot MD1CS003 Bench ERROR BOOT / Setup
Question from a user: "I'm trying to read a Peugeot MD1CS003 ECU on bench using the ECUHELP KT200II, and I keep getting a “BOOT / ERROR Setup” message. The ECU…
How to fix KT200II Read Mercedes ACM 2.1 get no connection?
ECUHELP KT200II user Feedback: Trying to read Mercedes ACM 2.1, getting no connection !! Checked pinout 10 times. Do you have any ideas what’s going on? This is the ECU…
KT200II R/W Ford Kuga 1.5 TDCi 120cv edc17c70 Bench Mode
ECUHELP KT200II is tested to program Ford Kuga 1.5 TDCi 120cv edc17c70, R/W bench mode no problem, checksum by KT200II. Connect the multifunction cable as follows: KT200II reads and writes…
ECUHELP KT200II R/W/CKS Dcm7.1A Opel Vivaro 2.0 2020 via OBD
ECUHELP KT200II feedback: Opel Vivaro 2.0 2020 Ecu: Dcm7.1A Virtual read ok, write ok, chks ok. Obd mode Image 1 displays the ECU DCM 7.1A. Image 2 displays the OBD…
KT200II R/W Edc17c69 Suzuki SX4 S-Cross 1.6 2018 on bench
ECUHELP KT200II is confirmed to Bench mode read & write Suzuki SX4 S-Cross 1.6 2018 Edc17c69. Image 1: The connection between the KT200II and the ECU Edc17c69. Image 2-3. KT200II…
ECUHELP KT200II R/W Fiat Doblo 1.3 2016 mjd8f3 d4 hw2 full system mode
ECUHELP KT200II ECU Programmer is confirmed to read/write Fiat Doblo 1.3 2016 ECU: mjd8f3 d4 hw2, chks ok on full system mode. Look at the image of ECU Fiat Doblo…
KT200II Read/Write Ibiza 1.2 TDI DCM3.7 via OBD (Guide)
This guide explains using the ECUHELP KT200II ECU Programmer to successfully read and write the DCM3.7 ECU in the Ibiza 1.2 TDI via OBD. Using a stabilizer is recommended to…