ECUHELP Kt200II Audi A3 8P Pcr 2.1 Unlock/Read/Write on Bench
ECUHELP KT200II User Feedback: Audi A3 8P Pcr 2.1 Unlock OK Read /Write on bench ok Fap, Egr Off Davinci Connect the bench box v.2 to the tool and connect…
ECUHELP KT200II User Feedback: Audi A3 8P Pcr 2.1 Unlock OK Read /Write on bench ok Fap, Egr Off Davinci Connect the bench box v.2 to the tool and connect…
ECUHELP KT200II ECU Programmer is confirmed to successfully read and write the Peugeot SID803A ECU Full System Mode. Checksum must be handled manually. Connection Guide To connect to the control…
Hi guys need a little advice here , i am using ECUHELP KT200II doing a sid211 ford transit 2018 , ecu is not unlucked so only readed the password by…
Question: When trying to start the ECUHELP kt200II online, I have this error “An internal Exception occurred”, can anyone suggest what to do? Reinstallation does not work Suggestion: Internet or…
ECUHELP KT200II ECU Programmer has been successfully tested for reading and writing the SID805 ECU on PSA Peugeot 107 and Citroën C1 1.4 HDI Full System Mode. Hardware Connection: To…
One common question is: "Do I need the KT200 Plus if I already own the ECUHELP KT200II ECU Programmer?" The short answer is yes, and in this article, we'll explain…
ECUHELP KT200II user Feedback: Trying to read Mercedes ACM 2.1, getting no connection !! Checked pinout 10 times. Do you have any ideas what’s going on? This is the ECU…
ECUHELP KT200II is tested to program Ford Kuga 1.5 TDCi 120cv edc17c70, R/W bench mode no problem, checksum by KT200II. Connect the multifunction cable as follows: KT200II reads and writes…
ECUHELP KT200II feedback: Opel Vivaro 2.0 2020 Ecu: Dcm7.1A Virtual read ok, write ok, chks ok. Obd mode Image 1 displays the ECU DCM 7.1A. Image 2 displays the OBD…
ECUHELP KT200II is confirmed to Bench mode read & write Suzuki SX4 S-Cross 1.6 2018 Edc17c69. Image 1: The connection between the KT200II and the ECU Edc17c69. Image 2-3. KT200II…